首页
HTRF KINASE-BIOTIN BIND. DISCOVERY KIT
品牌： Revvity
下载产品说明书 下载SDS
用小程序，查商品更便捷
收藏
对比
咨询
产品介绍
产品信息
Overview
The best known kinase inhibitor, Gleevec (Imatinib), binds a non-activated form of Abl. Such inhibitors are therefore more difficult to detect using activity based assays, so it is worthwhile to set up kinase binding assays for your kinase of interest in order to avoid missing out on such compounds.
Moreover the HTRF® kinase binding assays are easily set up, using a mix and measure detection format in the absence of ATP.
Direct displacement of the fluorescent-inhibitor from the ATP binding pocket is measured, enabling the determination of the affinity of your inhibitor by performing dose response curves.
Purified kinase preparation is less critical compared to enzymatic assays, since measurements can be performed on kinases which have little or no activity.
Specifications
| Assay Points | 1 |
|---|---|
| Assay Target Type | Kit |
| Assay Technology | HTRF |
| Brand | HTRF |
| Quantity | 1 |
| Therapeutic Area | Metabolism/Diabetes Neuroscience Oncology & Inflammation |
| Unit Size | 1 Unit |
Video gallery
How it works
Kinase-biotin discovery kit assay principle
The binding of the tracers is detected in a sandwich assay format using a specific streptavidin labeled with Europium Cryptate (donor), which binds to N-terminal biotinylated Kinase, and a red fluorescent tracer labelled with d2 (acceptor). The HTRF ratio (665/620) will increase upon the addition of more of the tracer, and will saturate depending on the dissociation constant (Kd) of the tracer to the N-terminal biotinylated kinase . The Kinase-biotin binding Discovery Kit helps determine which tracer might be best suited to setting up a binding assay. The tracer with the best assay properties (depending on the Kd and assay window generated) will be chosen to perform competitive binding assays.
Kinase-biotin discovery kit assay protocol
Saturation binding experiments on the three tracers (i.e. Staurosporine-Red, Dasatinib-Red, and Sunitinib-Red) can be run on 96- or 384-well plates (20 µL final volume). First, a dilution series of tracer ranging between 0 and 1 µM in the Kinase Binding Buffer is prepared in a 96-well non-binding plate. Next, 5 µL of Kinase Binding Buffer are dispensed into the final 96- or 384-well plate. Then 5 µL of N-terminal biotinylated-Kinase are added, followed by 5 µL of Streptavidin Eu-cryptate. Finally, 5 µL of the red tracer solution are added. The HTRF ratio is measured after 1 H of incubation.
Assay validation
Saturation Binding KIT-Biotin
A typical saturation binding experiment is performed using final tracer concentrations between 0 and 250 nM, and measuring total- and non-specific binding signals. Subtracting the non-specific from the total binding signal gives the specific signal, which can be analysed to give the Kd. Here an example is shown where the best tracer for inhibitor studies proved to be Sunitinib-Red, with a Kd of 22 nM on 5 nM KIT-BTN.
Saturation Binding SRC-Biotin
A typical saturation binding experiment is performed using final tracer concentrations between 0 and 250 nM, and measuring total- and non-specific binding signals. Subtracting the non-specific from the total binding signal gives the specific signal, which can be analysed to give the Kd. Here an example is shown where the best tracer for inhibitor studies proved to be Staurosporine-Red, with a Kd of 35 nM on 5 nM SRC-BTN.
Saturation Binding BRAF-Biotin
A typical saturation binding experiment is performed using final tracer concentrations between 0 and 250 nM, and measuring total- and non-specific binding signals. Subtracting the non-specific from the total binding signal gives the specific signal which can be analysed to give the Kd. Here an example is shown where the best tracer for inhibitor studies proved to be Dasatinib-Red, with a Kd of 52 nM on 5 nM BRAF-BTN.
声明 ：本官网所有报价均为常温或者蓝冰运输价格，如有产品需要干冰运输，需另外加收干冰运输费。
危险品化学品经营许可证(不带存储) 许可证编号：沪(杨)应急管危经许[2022]202944(QY) 
营业执照(三证合一)